Starting Your Troy Bilt Pressure Washer: A Step-by-Step Guide

how to start a troy bilt pressure washer

How to Start a Troy Bilt Pressure Washer

Starting a Troy Bilt pressure washer is a straightforward process that requires some basic steps to ensure safe and proper operation. Before you begin, make sure you have read the owner's manual and understand the safety precautions outlined by the manufacturer.

Pre-Start Checklist

Before starting your Troy Bilt pressure washer, perform the following checks:

• Ensure the pressure washer is on a level surface and the wheels are locked (if applicable)
• Check the oil level and add oil if necessary
• Verify the fuel level and add fuel if necessary
• Inspect the hose and wand for any damage or kinks

Starting the Engine

To start the engine, follow these steps:

1. Pull the choke lever to the "start" position
2. Pull the starter cord slowly until you feel resistance, then give it a quick pull to start the engine
3. Once the engine is running, push the choke lever to the "run" position

Note: If your Troy Bilt pressure washer has an electric start, simply turn the key to the "on" position and press the start button.

Final Checks Before Use

After starting the engine, perform a final check to ensure the pressure washer is ready for use:

• Check the pressure gauge to ensure the pressure is within the recommended range
• Verify the spray wand is securely attached to the hose
• Test the trigger to ensure it is functioning properly